Instruction Manual

9
10
7
8
left
right
3
SN4948 SN4478
4
5
6
2
1
Data Acquisition Procedure
1. Insert sensor insole into the shoe
Caution: read handling instructions!
5. Raise and/or unload left foot
6. Process left zeroing in Intensity widget
2. Walk 20-30 steps 3. For sensor insole interaction shake 2-3 seconds
4. Wait until wireless icons turn white (not flashing)
7. Raise and/or unload right foot
8. Process right zeroing in Intensity widget
9. Press "START" to start measurement
10. Perform test/motion sequence (w/o phone)
The following workflow describes the basic data acquisition procedure using the on-board memory
of the sensor insoles to collect data. Other ways of data collection and a more detailed description of the
workflow steps can be found on www.moticon.de/support.
13
The software setup (P09) and the sensor insole setup (P12) must be completed before starting
with the data acquisition procedure.
Carefully read all safety instructions (P10-P11) before you begin working with the sensor insoles.
Moticon SCIENCE Insole Instruction Manual 03.00.00