Instruction Manual

Sensor Insole Setup
1. Plug micro USB cable side into coin cell charger
2. Plug A-type USB cable side to 5.0V USB source
3
+ +
4
red
6
7
8
10
+
Sensor Insoles
11
Pair Name
SN4987
Select one left insole:
and one right insole:
SN4294
12
13
5. Green lights indicate full charge status,
remove coin cell batteries from charging slots
9. Shake left and right sensor insole 2-3 seconds
to activate them (auto turn on/off, no switches)
1
2
1
2
3. Insert coin cell batteries in charging
slots, "+" terminal outwards
4. Press reset button to start charging,
red lights indicate charging
5
green
6. Remove battery lid from sensor insole
7. Insert PD2032 coin cell battery
8. Attach battery lid to sensor insole
9
left
right
10. Select "Sensor Insoles" section in mobile app
11. Press "+" to start pairing new sensor insoles
12. Enter name, select left and right sensor insole
13. Press confirm button to save pairing settings
12
Moticon SCIENCE Insole Instruction Manual 03.00.00