Instruction Manual

Safety warnings against misuse of sensor insole
Do not attempt to modify the size or shape of a sensor insole. Do not cut the sensor insoles!
This is dangerous and will damage the sensors.
Do not bend or twist the sensor insole, to prevent damage of electronics. The sensor insole is
designed to be used inside a shoe, atypical bending or torsiioin will destroy it.
Safety warnings for coin cell batteries
Do not sting or prick the sensor insoles. Remove any sharp or spiky objects from footwear when
using sensor insoles. Sharp elements cause severe damage. Do not use damaged sensor insoles.
Always keep the product and the coin cell batteries away from children to prevent swallowing.
Never use batteries other than the coin cell battery type specified by Moticon. They are labeled
as follows: Route JD Inc Li-ion Rechargeable 3.7V
Do not use the sensor insole in case of a damaged, demolished or shifted battery contact
terminal. Do not use the sensor insole with open battery compartment.
Do not remove the coin cell battery during a measurement. For longer measurements, instruct
the wearer to not remove the battery and to not remove the battery lid.
Do not use sharp objects for removing the battery. Only use the tip of the finger.
Only insert fully charged batteries into sensor insoles, otherwise the battery level indicator
in the Moticon SCIENCE Mobile App will display wrong values.
See the detailed product information on www.moticon.de/accessories and tutorial videos
about correct coin cell battery handling on www.moticon.de/support.
Do not use sensor insoles for measurements outside of closed footwear. Do not wear sensor
insoles when driving a car or climbing a ladder.
Do not use the sensor insole in wet conditions, e.g. rain or strong foot sweat.
11
Safety Instructions
Moticon SCIENCE Insole Instruction Manual 03.00.00