Quick Start Guide

Using the camera on a Trinocular Microscope
1. Install the Motic Images Plus application program from the CD included.
2. Remove the Dust Cap (B) from the camera (A) and attach the microscope’s C-Mount adapter
(*Please note that the C-Mount adapter is specific to your microscope. For Motic microscopes,
please consult the relevant Motic Accessory list and choose an appropriate adapter for your
Moticam. Depending on the type of adapter and microscope, the C-Ring (E) may be necessary
between the camera and the C-mount adapter).
WiFi signal. Please see the instructions on page 6.
5
3. Connect to the Moticam X3