Operation Manual

54
7.4 Bulb replacement
The lamp and the lamp house become very hot during and after a period of operation.
Risk of burn – Do not touch the lamp during or immediately after period of operation.
Make sure the lamp has cooled sufficiently before attempting to replace the lamp.
Ɣ In order to prevent electric shock always turn the power switch off and unplug the power cord
before installing or replacing the bulb.
7.5 Shifting of Instrument
Caution:
To avoid the risk of electric shock, this equipment must only be connected to a supply main with
protective earth.
The protection provided by the equipment may be impaired if the equipment is used in a manner not
specified by the manufacturer.
Ɣ When moving the microscope, grasp rear handle and the base with more than two peoples as
shown below.
(Fig. 43)