Operation Manual

52
Note:
Ɣ If equipment is used in a manner not specified by the manufacturer, the warranty may be void.
Ɣ To avoid getting wet, do not use the microscope near water.
Proper handling of the microscope will ensure years of trouble-free service. If repair becomes necessary,
please contact your Motic agency or our Technical Service directly.
6.6 For MXH-100 Power supply unit
Ɣ Ensure the fan on the back panel of the power supply is kept free of obstructions. Do not cover
with cloth or other items that may block the flow of air.
Ɣ Ensure air is able to freely flow through the lamp housing. Do not cover with cloth or other items
that may block the flow of air as this will affect heat dispersal.
Ɣ If there is dust on the outer casing, wipe it off using a dry cloth.
Ɣ Do not touch the bulb or collector lens directly with your fingers. Use a dry cloth to wipe the bulb
and clean the collector lens.
Ɣ When both in use and in storage, always protect the microscope from dust and moisture in order
to keep the electrical components running smoothly.
Ɣ When cleaning, ensure the power has been turned off and the plug removed from the power
supply.
Ɣ Turn the power on and off as little as possible to preserve the life of the lamp. If the instrument is
damaged, do not take the instrument apart or attempt to repair. Contact your local distributor or a
professional to help repair the instrument.
Ɣ No liquid is allowed for cleaning any part of this product.
Ɣ Disconnect the power supply before replacement of fuse.