Operation Manual

38
3.17 Installing the lamp (Only for Mercury Lamp)
NOTICE: Please follow all NOTES FOR SAFETY / SAFETY PRECAUTIONS and user personal
protection equipment all the time
Ɣ In order to prevent electric shock please always make sure to turn the power switch off, and
unplug the power cord before installing or replacing the lamp.
Ɣ Loosen the Mercury lamp house cover clamp screw (Fig. 38-1 -- Loosen) and remove the cover
andthelamp socket assembly. (Fig. 38-2)
(Fig. 38-1) (Fig. 38-2)
Ɣ Loosen the lamp clamp screws at both ends of the lamp socket and remove the installed
“Dummy lamp”. (Fig. 38-3)
Ɣ Before handling the lamp, read the handbook supplied with the lamp.
Ɣ When installing the lamp, avoid applying force that might cause the lamp to break.
Ɣ Match the large and small diameter metal ends on lamp and lamp socket. (Fig. 38-4)
(Fig. 38-3) (Fig. 38-4)