Operation Manual

18
2. SETTING UP THE INSTRUMENT
Ɣ Avoid placing the instrument in areas exposed to dust, vibration, high temperature and high
humidity and where it is difficult to unplug the power supply cord.
Ɣ Avoid locations exposed to direct sunlight, under room lights.
Ɣ Select location which allows easy access to power cord from products AC inletin the event of
an emergency.
2.1 Operating environment
Ɣ Indoor use
Ɣ Altitude: within 2000m
Ɣ Environment temperature: 5°C ~ +40°C
Ɣ Humidity: 30% - 75% (No condensation)
Ɣ Power supply voltage fluctuation should not be more than ± 10% of nominal voltage;
Ɣ Air pressure: 75kPa~106kPa
Ɣ Pollution degree II
Ɣ Overvoltage category II
Ɣ Air pressure of 75kPa to 106kPa
Ɣ Avoid frost, dew, percolating water, and rain