Datasheet

9
Wiring
Black
M-
Power
Wire definitions:
● Without positioning sensor feedback
Red
M
+
Power Signal
● With Hall effect sensor x 1
White
GND
Yellow
VCC
Blue
DATA
Black
M-
Red
M
+
Note:
1. Connect Red (M+) to ‘+’ & Black (M-) to ‘-’ of DC power, the actuator will extend.
Note:
1. Connect Red (M+) to ‘+’ & Black (M-) to ‘-’ of DC power, the actuator will extend.
2. Hall effect sensor resolution
3. Voltage input range (VCC): 3.5~20V
4. Output voltage of signal (Data) = Input voltage of VCC
5. Hall signal data
10:1
5:1
20:1
Gear ratio
30.1
40:1
Resolution (pulses/mm)
2.27
3.62
6.86
11.0
14.5
● With Hall effect sensor x 2
White
GND
Power Signal
Black
M
-
Yellow
VCC
Green
DATA2
Blue
DATA1
Red
M
+
Note:
1. Connect Red (M+) to ‘+’ & Black (M-) to ‘-’ of DC power, the actuator will extend.
2. Hall effect sensor resolution
3. Voltage input range (VCC): 3.5~20V
4. Output voltage of signal (Data) = Input voltage of VCC
5. Hall signal data
10:1
5:1
20:1
Gear ratio
30.1
40:1
Resolution (pulses/mm)
2.27
3.62
6.86
11.0
14.5
DATA
VCC
GND
DATA1
DATA2
VCC
GND
VCC
GND
DATA1
DATA2
VCC
GND
VCC
GND
Actuator extends Actuator retracts