Specifications

30 MosquitoBite Planes Robin
Building the Nose
The Upper Cowl
To create the Upper Cowl, locate F1B and all UC1 to UC5 parts.
Glue together UC3 and UC4 parts as shown in Figure 56.
Glue both assemblies to the front side of UC1 as shown and as
seen on Plan Sheet 1.
Into UC1, glue both UC2 parts. Glue F1B into the keys of both
UC2 and UC4 parts.
Glue on UC5, keying it into UC1 and F1B.
The Lower Cowl
To create the Lower Cowl, locate F1C and all LC1 to LC4 parts.
Glue both LC3 parts into LC1.
Onto the LC3 and LC1 parts, glue LC2.
Fig 56