Specifications

22 MosquitoBite Planes Robin
Main Hatch
Forward Hatch Structure
Locate HS6, HS7, HS8 (x2), HS9, HS10,
HS11, HS14 (x2), and HS15 (x2).
Dryfit HS11 onto the Pegs behind the Firewall. Note the
orientation.
Locate and test-assemble the parts of the Forward Hatch detailed
below. Also see the diagram on Plan Sheet 1.
Once you are familiar with how the parts assemble, reassemble
with wood glue. Immediately assemble and glue the remaining
forward parts – HS15 (x2) – that connects to HS11. It is important
that the entire assembly cure while seated in the Fuselage.
Locate HS7 and HS 8 (x2) and refer to the Hatch diagram on Plan
Sheet 1.
HS7 keys into the lower openings of HS9. Glue the bottom tabs in
place. The top leans against HS6, unglued.
Glue both HS8 parts to the front of HS6, resting them on the top
of HS7. This will lock HS7 in place.