SDS

5 of 10
8.1 Control Parameters
Component Exposure Limits
None
Derived No Effect Levels (DNELs)
No DNELs available
Predicted No Effect Concentrations (PNECs)
No PNECs available
8.2 Exposure Controls
Appropriate Engineering Controls
Provide general ventilation.
SKIN PROTECTION:
Wear protective clothing, including boots and gloves. For filling operations if dust/mist is
produced wear a dust mask. Wear gloves made of impervious materials. Wash thoroughly
with soap and water after handling.
EYE PROTECTION:
Wear
goggles, safety glasses with side shields
RESPIRATORY PROTECTION:
Use dust/mist filtering respirator (MSHA/NIOSH approved number prefix TC-21C or a NIOSH
approved respirator with any N, P, R or HE filter during application procedures or when repeat
exposure is expected.
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on Basic Physical and Chemical Properties
Appearance/Odor:
Light Brown granular solid
Odor Threshold:
Musty - Characteristic
pH:
5.4 (10% dispersion in
water)
Boiling Point:
Not applicable
Melting Point:
Not Applicable
Solubility (H
2
O):
Suspends and partially
soluble
Specific Gravity:
Not Determined
Bulk Density:
0.48 g/mg
Octanol/H
2
O Coeff:
Not Applicable
Evaporation Rate:
Not Applicable
Molecular Weight:
Not Applicable
Decomposition Temp.:
Not Determined
Auto Ignition:
Not Determined
LFL:
Not Determined
Flash Point:
Not Determined
UFL:
Not Determined
Vapor Density:
Not Applicable
Vapor Pressure:
Not Applicable
SAFETY DATA SHEET
Summit Mosquito Bits®