Spec Sheet
WWW.MOSMATIC.COM
35
2017
With fluid recovery port
Ready to use
Designed for higher pressures
GRAFFITI REMOVER
The Graftti remover has an upgraded swivel and rotor arm for more industrial applications such as grafti
removal. It is also used in restoring a wide variety of surfaces, as well as indoor and outdoor contract cleaning.
FEATURES
Brush Ring
Ideal for outdoor applications such as concrete, brick, limestone or
wood surfaces.
Plastic rim guard
Indoor use, prevents dirt and debris from building up on the rim.
Adheres to purity regulation in the food and clinical industries.
Recovery System
Environmental protection is more important than ever. These recovery
units have a double wall housing to optimize vacuum power.
Residual water and debris can be recovered, recycled and reused.
Swiss Engineering
High rpm stainless steel swivel features reinforced self lubricated
stainless steel ball bearings for improved performance. The dual
spring based carbide seal system, guarantees long lasting operation
under tough conditions.
DYW Swivel
Part No. 55.020
Recovery port
ø 2"
Rotor Arm
Body
Rotor Arms
Can withstand up to 7300 psi, are precision welded and balanced.
2cw2 (2 Arms / 2 Nozzles)
Part No. 82.321 (ø 6") Part No. 82.323 (ø 10")
TECHNICAL DATA
Pressure 5000 psi
Temperature 250°F
Inlet 3/8" NPTF
FL-ABB 300
FL-ABB 200
Name Part No. ø Weight Swivel Rotor Arm HP-Nozzles HP-Gun
FL-ABB 200 78.285 8" 6.0 lbs 1x DYW 2x 1/8" NPTF 2x 1503 1x
FL-ABK 200
*
78.286 8" 6.2 lbs 1x DYW 2x 1/8" NPTF 2x 1503 1x
FL-ABB 300 78.287 12" 7.1 lbs 1x DYW 2x 1/8" NPTF 2x 1503 1x
FL-ABK 300
*
78.288 12" 7.3 lbs 1x DYW 2x 1/8" NPTF 2x 1503 1x
* with Plastic rim guard