Specifications

AM/FM Radio Receiving Function
2
AM/FM Radio Receiving Function
Choosing the Radio Station
■
Tuning into stations automatically
1.
Press AM or FM on the unit to select either "AM" or
"FM".
2.
Press TUNING MODE, so that the "AUTO" indicator on
the display lights.
3.
Press TUNING . The automatic search for a radio
station starts. Searching stops when one is found. When
tuned into a radio station, the " TUNED " lights on the
display lights. When tuned into an FM radio station, the
"FM STEREO" indicator lights.
⿠
No sound is output while the " TUNED " indicator
is off.
When the signal from an FM radio station is weak:
Depending on the structure of the building and the
surrounding environment, the radio wave condition is
different and it may be impossible to get good reception.
In that case, manually tune into the radio station of your
choice by referring to the next section.
■
Tuning into stations manually
1.
Press AM or FM on the unit to select either "AM" or
"FM".
2.
Press TUNING MODE, so that the "AUTO" indicator on
the display goes off.
3.
Press and hold TUNING to select the desired radio
station.
⿠
The frequency changes by 1 step each time
you press the button. The frequency changes
continuously if the button is held down and stops
when released. Tune by looking at the display.
To return the indicator to "AUTO": Press TUNING MODE
again on the main unit. The unit automatically tunes into an
FM station. Normally, leave the indicator in "AUTO".
■
Tuning into stations by frequency
It allows you to directly enter the frequency of the radio
station you want to listen to.
1.
Press AM or FM on the remote controller to select either
"AM" or "FM".
2.
Press D.TUN.
3.
Using the number buttons, enter the frequency of the
radio station within 8 seconds.
⿠
For example, to tune to 87.5 (FM), press 8, 7, 5 or 8,
7, 5, 0. If you have entered the wrong number, you
can retry after 8 seconds.
Registering Radio Station
It allows you to register up to 40 of your favorite AM/FM
radio stations. Registering radio stations in advance allows
you to tune into your radio station of choice directly.
■
Registration
1.
Tune into the AM/FM radio station you want to register.
2.
Press MEMORY on the unit, so that the preset number
flashes on the display.