Product Manual

General precaution when handling the machine.
In order to minimize the dangers involved in moving the
equipment it is important to follow carefully the require-
ments below:
• The transport must always be done with the engine
off, with electrical cables and starting battery discon-
nected, fuel tank empty.
• Clear the moving zone of all possible obstacles and
from all unnecessary personnel.
• Use properly sized lifting equipment regularly submit-
ted to major overhaul by an authorized organisation.
It is prohibited to fasten objects or accessories
on the lighting tower baseframe that may modify
weight and center of gravity and may cause move-
ments unforeseen by the lifting eyes.
• Do not subject the lighting tower and lifting equip-
ment to abrupt or undulating movements that pass on
stress dynamics to the structure.
• Do not lift the equipment at heights greater than those
strictly necessary.
• To access the attachment points on the roof of the
machine, use approved ladders only. Climb the lad-
der being supported by a second operator and wear
special non-slip shoes.
Moving the generating set via forklift
When lifting with a forklift it is necessary to:
• Insert the forks of the forklift into the specic pockets
located sideways and frontally on the baseframe, as
indicated in the gures.
• Fully insert the forks so that they stick out from the
opposite side and be careful to keep the equipment in
horizontal position.
Stickers on the base indicate where to place the lifter
forks.
ATTENTION
During handling of the lighting tower is essential
to pay close attention.
All handling operations must be performed by
qualied personnel.
For the characteristics of weight and size, an error
during the handling of the machine may result in
serious damage to the surrounding people and to
the machine itself.
Transport and handling
I
GB
F
!
M
4.2
REV.0-10/13
Moving the generating set via cables or chains
When lifting the genset with the aid of cables or chains it
is necessary to use equipment periodically checked by
a licensed organisation. Hook the cables only on to the
points provided for this use and shown via the appro-
priate stickers.
14/10/13 M4.2-I_TF
OK
NO
NO
OK
OK
NO
NO
NOOK
OK
NO