User Manual

13/11/14 M38_EN

ENGLISH

The coupling of the TCM 35 with the generating set, ready for

remot starting, permits to work far from the set itself.

The remote control is connected to the front plate (X1), and/or

rear plate, with a multiple connector.

The TCM35 remote control only works with the controller (ge-

nerator management and control unit) in AUT mode (automatic

mode).

MAKE SURE

 The selector LOCAL START/REMOTE START (I6) of the generating set must be switched on LOCALSTART.

REV.1-02/17

REMOTE CONTROL

TCM 35

38.6