7 kVA Honda 200A Three Phase DC Arc Welder Generator Product Card

MADE IN ITALY
language
ALTERNATOR SYNCHRONOUS THREE-PHASE, SELF-EXCITED, SELF-REGULATED
Insulation class H
a.C. gEnEration
pag 2
01/2021
CONSTANT CURRENT
Current range 40A / 21.6V ÷ 200A / 20V
Type of regulation Step adjustment
Duty cycle 160A / 26.4V - 60% | 120A / 24.8 - 100%
Open circuit voltage 85V
Arc force control No
C.C. WElding
gEnEral SpECifiCationS
Fuel tank capacity 6.1 l
Fuel consumption
(welding 60%) 2.1 l/h
Running time
(welding 60%) 2.9 h
Battery Starter /
IP protection degree IP 23
*Measured acoustic power LwA
(pressure LpA)
97 dB(A) (71 dB(A) @ 7 m)
*Guaranteed acoustic power LwA
(pressure LpA)
97 dB(A) (71 dB(A) @ 7 m)
* Acoustic power according to European Directive 2000/14/EC
GM 7-200 HBT
auxiliary gEnEration
OUTPUT 1
Type of source Three-phase
Frequency 50 Hz
Power kVA (Power kW) Max 7kVA (5.6kW)
Power kVA (Power kW) PRP 6.5kVA (5.2kW)
Cos j 0.8
Voltage 400V
Current Max 10.1A
Current PRP 9.4A
OUTPUT 2
Type of source Single-phase
Frequency 50 Hz
Power kVA (Power kW) 4kVA (4kW)
Cos j 0.8
Voltage 230V
Current 17.4A
• Manual recoil
• Engine switch ON- OFF
• Choke
• Range welding selector
• Welding current selector
• Welding sockets
• Thermal circuit breaker for 230V/16A sockets
• Output sockets: 1x 400V 16A 3P +N+T CEE
1x 230V 16A 2P+T CEE
• Earth terminal (PE)
Control panEl
The use of the auxiliary generation is recommended for welding tools (grinding wheels, electric hammers, lights, etc.)
CHARACTERISTICS OF
WELDING AND GENERATION