8 kVA Kohler 250A Three Phase Multi Process DC Arc Welder Generator Product Card

MADE IN ITALY
language
TS 275 EVO MULTI4
auxiliary gEnEration
OUTPUT 1
Type of source Three-phase
Frequency 50Hz
Power kVA (Power kW) Max 8 kVA (6.4kW)
Cos j 0.8
Voltage 400V
Current 11.5 A
OUTPUT 3
Type of source Single-Phase
Frequency 50Hz
Power kVA (Power kW) Max 2.5 kVA/kW
Cos j 0.8/1
Voltage 110V CTE
Current 22.7A
OUTPUT 2
Type of source Single-Phase
Frequency 50Hz
Power kVA (Power kW) Max 5 kVA/kW
Cos j 0.8/1
Voltage 230V
Current 21.7A
OUTPUT 4
Type of source Single-Phase
Frequency 50Hz
Power kVA (Power kW) Max 5 kVA/kW
Cos j 1
Voltage 48V
Current 104A
GENERATION AND
CONTROL PANEL
• Dierential switch (400V / 230V)
• Magnetothermic switch for 230V sockets
• Thermal cut-os for socket protection: 1x 16A for 230V 16A 2P + T CEE
socket
• Output sockets: 1x 400V 32A 3P+N+T CEE
1x 230V 32A 2P+T CEE
1x 230V 16A 2P+T CEE
N ° 2 200A output terminals (for 48V)
• Earth terminal (PE)
• Dierential switch (400V / 230V)
• Magnetothermic switch for 230V sockets
• Magnetothermic switch for 110V sockets
• Thermal cut-os for protection 1x 16A sockets for 110V 16A 2P + T CEE
socket
• Output sockets: 1x 400V 32A 3P+N+T CEE
1x 230V 32A 2P+T CEE
1x 110V 32A 2P+T CEE
1x 110V 16A 2P+T CEE
• Earth terminal (PE)
• Dierential switch (400V / 230V)
Magnetothermic switch for 230V sockets
• Output sockets: 1x 400V 32A 3P+N+T IP67 AUS
1x 230V 32A 2P+T IP67 AUS
1x 230V 15A 2P+T IP67 AUS
• Earth terminal (PE)
gEnEration (VErs. 400V / 230V / 48V)
gEnEration (VErs. 400V / 230V / 110V)
gEnEration (VErs. aus)
• Controller RGK420SA
• Thermal circuit breaker for motor protection: 1x30A
• Thermal circuit breaker for motor protection: 1x5A
• Acoustic signal
• Emergency stop button
EnginE Control panEl
RGK420SA CONTROLLER FEATURES
Operating modes
• MAN - REMOTE
Display
• Backlit display, LCD
• Buttons: START  - 
• Key
Generator measurements
• Voltage L1-L2 / L2-L3 / L3-L1 - N-L1/N-L2/N-L3
• Frequency Hz
Engine measurements • Fuel level
• Engine revs
• Hour meter
• Battery voltage
Generator protections
• Overvoltage
• Under tension
• Overfrequency
• Underfrequency
Motor protections
• Overspeed
• Low speed
• High temperature
• Low oil pressure
• Low fuel pre-alarm
• Low fuel level
• Battery voltage
• Inecient battery
• Battery charge alternator fault
• Emergency stop
• Failure to start
• Failure to stop
• Maintenance
Features
• Operator interface with symbols, codes and
texts
• Panel or PC programming
• External start and stop
• Programmable inputs and outputs
• Operating temperature: -30 ° C - + 70 ° C
• NFC interface for wireless programming
pag 3
09/2021