Product Card
MADE IN ITALY
language
ENGINE DRIVEN WELDER
TS 600 EVO MULTI4
The images are for reference
Pag 1
09/2019
air
cooled
diesel electric
starter
4 STROKE, DIRECT INJECTION
50 Hz 60 Hz
Model DEUTZ F4L2011
* Stand-by net power 29 kW (39.4 hp) 34.5 kW (47 hp)
* PRP net power 27.7 kW (37.7 hp) 32.8kW (44.6 hp)
* COP net power /
Cylinder / Dislacement 4/ 3100 cm³
Bore / Stroke 94 / 112 (mm)
Compression ratio 17.5 : 1
BMEP (Brake Mean Eective
Pressure : LTP - PRP)
/
Speed governor type Mechanical
FUEL CONSUMPTION
110 % (Stand-by power) 7.7 lit./h 9.5 lit./h
100 % of PRP
7.3 lit./h 9 lit./h
75 % of PRP 5.4 lit./h 6.5 lit./h
50 % of PRP 3.7 lit./h 4.2 lit./h
25% of PRP 2.2 lit./h 2.7 lit./h
COOLING SYSTEM
Total system cap. - only engine /
Fan air flow 24.83 m³/min 29.83 m³/min
LUBRIFICATION SYSTEM
Total oil system capacity /
Oil capacity in sump 10.5l
Oil consumption at full load /
EnginE 1500 (50Hz) 1800 (60Hz) RPM
EXHAUST SYSTEM
Maximum exhaust gas flow 337 m³/h 400 m³/h
Max. exhaust gas temp. 510 °C 540°C
Maximum back pressure 7.5 kPa (0,075 bar)
External diameter exhaust pipe /
ELECTRICAL SYSTEM 12 Vdc
Starter motor power 2.6 kW
Battery charging alternator cap. 60 A
Cold start - 15 °C
AIR FILTER Dry
Combustion air flow 2 m³/min. 2.3 m³/min.
HEAT REJECTED AT FULL LOAD
To exhaust system /
To water and oil /
Radiated to room 5,0 kWh
To charge cooler /
* Maximum output (not overloadable) according to ISO 3046-1
FEATURES
• Reliable, heavy duty construction with up to 600A
output
• Digital setting of welding parameters
• Stick easy start
• Arc force and multi-process parameters setting
• Digital Ammeter and Voltmeter: presetting of welding
parameters
• VRD - Voltage reduction device
• A.C. generator, single-phase and three-phase also
available while welding
• Engine digital control
• Bunded base
• Main battery switch
• Base with forklift pockets
• Canopy suitable for stacking up max 2 machines
• Single point lifting eye
• Large access for engine maintenance
• Meets EC directives
PROCESS
SMAW Shielded
Metal Arc welding
(STICK)
Gas Tungsten Arc
Welding (TIG)
Arc Gouging
Gas Metal Arc
Welding GMAW
(MIG)
Flux Cored Arc
Welding FCAW
(FLUX CORED)