14 kVA Kohler Three Phase Multi Process DC Arc Welder Generator Product Card

ManualsBrandsMosa ManualsDiesel Generators14 kVA Kohler Three Phase Multi Process DC Arc Welder Generator TS 405 EVO MULTI 4

MADE IN ITALY

language

ENGINE DRIVEN WELDER

TS 405 EVO MULTI4

The images are for reference

water

cooled

diesel electric

starter

4 STROKE, NATURAL ASPIRATED

Model KOHLER KDW1003

Stand-by net power 17.15 kW (23.3 hp)

PRP net power 15.6 kW (21.2 hp)

COP net power /

Cylinder / Dislacement 3 / 1028 cm³ (1.028 lt.)

Bore / Stroke 75 / 77.6 (mm)

Compression ratio 22.8 :1

BMEP (Brake Mean Eective

Pressure : LTP - PRP)

Speed governor type Mechanical

FUEL CONSUMPTION

110 % (Stand-by power) 5.4 lt./h

100 % of PRP 4.9 lt./h

75 % of PRP 3.7 lt./h

50 % of PRP 2.7 lt./h

COOLING SYSTEM

Total system cap. - only engine /

Fan air ﬂow 93 m³/min.

LUBRIFICATION SYSTEM

Total oil system capacity 2.6 lt.

Oil capacity in sump 2.5 lt

Oil consumption at full load /

EnginE 3000 rpm

EXHAUST SYSTEM

Maximum exhaust gas ﬂow 3.2 m³/mim.

Max. exhaust gas temp. 540 °C

Maximum back pressure 8000 kPa (0.08 bar)

External diameter exhaust pipe /

ELECTRICAL SYSTEM 12 Vdc

Starter motor power 1.6 kW

Battery charging alternator cap. 40 A

Cold start - 15 °C

With cold start device /

AIR FILTER Dry

Combustion air ﬂow 1.6 m³/min.

HEAT REJECTED AT FULL LOAD

To exhaust system /

To water and oil /

Radiated to room /

To charge cooler /

WELDING PROCESS

SMAW Shielded

Metal Arc welding

(STICK)

Gas Tungsten Arc

Welding (TIG)

GMAW Gas Metal

Arc Welding (MIG)

FCAW Flux Cored

Arc Welding (FLUX

CORED)

Arc Gouging

SMAW (STICK)

pag 1

09/2021

CARATTERISTICHE

• Multi-process DC arc welder

• “EVO MULTI4” welding control panel

• Digital adjustment of the welding parameters

• Welding arc adjustment and multi-process parameters

• Ammeter and digital welding voltmeter with pre-setting

of the welding parameters

• VRD function

• AC power generator three-phase and single-phase

available during the welding phase

• Digital engine management and control module

• Bunded base

• Canopy with wide opening to allow easy maintenance

(replacement of air, oil, fuel ﬁlters)

• Large capacity tank

• Fuel level sensor

• External plugs for oil and water drainage

• Emergency stop button

• Central lifting eye

• Compliant with EC / EU Directives

Summary of content (5 pages)

PAGE 1
language M A D E I N I T A L Y ENGINE DRIVEN WELDER TS 405 EVO MULTI4 The images are for reference WELDING PROCESS SMAW Shielded Metal Arc welding (STICK) Gas Tungsten Arc Welding (TIG) GMAW Gas Metal Arc Welding (MIG) GE 5 FCAW Flux Cored Arc Welding (FLUX CORED) A ST ENGINE Arc Gouging SMAW (STICK) Engine 3000 rpm 4 STROKE, NATURAL ASPIRATED Model Stand-by net power PRP net power COP net power Cylinder / Dislacement Bore / Stroke Compression ratio BMEP (Brake Mean Effective Pressure : LTP - PRP)
PAGE 2
language I N I T A L Y TS 405 EVO MULTI4 M A D E WELDING C.C. Welding C.V. Welding (constant voltage) CONSTANT CURRENT - COATED ELECTRODE SMAW (STICK) Current range Type of regulation Duty cycle Open circuit voltage SMAW (MIG) 20A / 20.8V ÷ 400A / 20V Continue on 2 scale 20A ÷ 200A / 20A ÷ 400A 330A @ 23.2V / 60% 300A @ 32V / 100% 75 Vcc (79 Vcc peak) Current range Welding voltage Duty cycle 40A @ 16 V - 400A @ 20V continue 15 V ÷ 45 V 330A @ 30.
PAGE 3
M A D E I N I T A L Y TS 405 EVO MULTI4 language GENERATION AND CONTROL PANEL Auxiliary Generation Type of source Frequency Power kVA (Power kW) Max Cos j Voltage Current OUTPUT 1 Three-phase 50Hz 14 kVA (11.2 kW) 0.8 400V 20.2 A Type of source Frequency Power kVA (Power kW) Max Cos j Voltage Current OUTPUT 2 Single-Phase 50Hz 8 kVA/kW 0.8/1 230V 34.8 A Type of source Frequency Power kVA (Power kW) Max Cos j Voltage Current OUTPUT 3 Single-Phase 50Hz 4 kVA/kW 0.8/1 110V CTE 36.
PAGE 4
M A D E CONTROL PANEL I N I T A L Y TS 405 EVO MULTI4 language Welding • Welding output sockets: 1x Welding (+) 400A 1x Welding (-) 400A • Remote control connector. Automatic switching upon insertion of the connector. • 14-pole connector for connecting the wire feeder or the PL 400 Box.
PAGE 5
M A D E WEIGHT - DIMENSIONS ACCESSORIES I N I T A L Y TS 405 EVO MULTI4 language The welding machine pictured may include optional accessories. DRY WEIGHT: • 455 Kg 931 945 DIMENSION PICTURE (mm) 1433 1568 710 OPTIONS ON REQUEST Remote control: RCE Remote control RCE PL - (Remote control for polarity inversion) • Remote control extension (30m) • Wirefeeder WF4 • Box PL 400 - External Polarity Reversal - max. 400A • Welding kit (mask, gloves, etc.