14 kVA Kohler Three Phase Multi Process DC Arc Welder Generator_Manual

21/04/21 C1KS1021_EN
ENGLISH
ENGLISH
M
31
CONTROLS DESCRIPTION
T6
AA 59A Z2 D
910X112R3
L5
59B
15
Z2 D
90
Z2 D
REV.0-08/21
400/230/48V version 400/230/110V version
EVO INSTRUMENTS 400/230V AUS version
Pos. Description Function
9 c.c. welding sockets (+) Connection sockets for welding cables
10 c.c. welding sockets (-) Connection sockets for welding cables
90 EVO control Multi 4 Welding control panel
- Welding procedure selector
- Current/voltage encoder (adjustment)
- Multifunction encoder
- n.2 display for setting and viewing the welding parameters
- Buttons to save and recall the welding proles
- Signal leds
X1 Remote control socket Multiple connector for remote control.
T6 Wire feeder connector Multiple connector for wire feeder
AA Engine control unit "RGK 420SA"
• Start and stop the machine
• Fuel level gauge
• Hour meter
• Battery voltage
• PPM
• Three phase and single phase voltage
• Frequency
• Display with texts and icons for management alarms
• Maintenance
• Texts for parameters and alarms in 5 languages (EN - IT - FR - ES - DE)
59A Engine thermal switch Protection against over-currents and short circuits in the engine electrical system.
R3 Siren Gen-set acoustic alarm.
L5 Emergency stop button To be pushed in case of danger. Immediate stop of the gen-set.
15 A.C. socket AUX sockets for load connection.
D Ground fault interrupter (30 mA) Device for protection against not-direct contacts for TN and TT systems (neutral grounded
to frame)
Z2 Thermal-magnetic circuit breaker Protects the system connected to the outlets from overcurrent and shortcircuit.
59B AUX thermal circuit breaker Overcurrent protection of the equipments connected to the single-phase sockets
12 Earth terminal Ground connection point for gen-set.
23