14 kVA Kohler Three Phase Multi Process DC Arc Welder Generator_Manual

13/11/14 M2-5 (TS)_EN
ENGLISH
ENGLISH
M
2.5.3
ADDITIONAL REQUIREMENTS FOR ENGINE DRIVEN WELDERS
Do not touch parts with OCV, it can cause mortal shock or
heavy born.
OCV is active at welding stick and auxiliary side when welding
generating set is working.
Do not manage electric devices and welding stick whit feet,
hands or wet dresses.
Protect yourself from electric shock by insulating yourself from
work and ground.
Use non-ammable, dry insulating material if possible, or use
dry rubber amts, dry wood or plywood, or other dry insulating
material.
Magnetic elds can affect pace-makers. Pace-maker wearers
keep away from arc welding and cutting operations and
equipment.
Wearers should consult their doctor before going near arc
welding, gouging, arc cutting, or spot welding operations.
Breathing welding fumes can be hazardous to your health.
Keep your out of the fumes
Use enought ventilation, exhaust at the arc, or both, to keep
fumes and gases from your breathing zone and the general
area.
If adequancy of ventilation or exhaust is uncertain, have the
air quality checked.
Arc rays can burn eyes and skin.
Use welding helmet with correct shade of lter.
While working protect your eyes using glasses with lateral
screen and your head with dedicated cap; in case of restricted
working area or unsafe working position also protect your
ears.
Wear complete body protection. Wear oil free protective
clothing such as leather gloves, heavy shirt, cufess pants,
and hight boots.
Welding can cause re or explosion.
Have a re extinguisher nearby, and have a trained re
watcher ready to use it.
Do not weld near ammable material. Move ammanles at
least (10 m) away or protect them with ame-proof covers.
Do not weld containers, structures, etc. with fammable
materials inside (tank, cylinder, etc.); in case you need to weld,
verify such items by qualied person in order to fully safely
operate.
Hot parts can cause severe burns.
Don’t touch the welder with bare hand. If handling is needed,
use proper tools and/or wear heavy, insulated welding gloves
to prevent burns.
Allow cooling period before handing parts or working on gun
or torch.
SAFETY RULES
ENGINE DRIVEN WELDERS
REV.0-01/18
11