Product Manual

ASSEMBLY

CTM330

CTL330

6.17

REV.0-06/10

Nota: Lift the machine and assemble the parts as shown in the drawing

For assembling the generating set on the trolley CTL330

please keep to following instructions:

1) - Lift the generating set (by means of suitable hook).

2) - Slightly x the jaw (3) of the parking foot to the

barwith the M10x20 screws, the M10 nuts and the

washers (so as to let the foot sprag go through).

3) - Split (unscrewing them) the two parts of the foot

(4S-4I) to be able later to assemble them on the jaw.

4) - Introduce into the jaw (3) the upper part (4S) of the

foot and screw again the lower part (4I), then tighten

the screws (4V) of the jaw to the towbar and block

momentaneously with the lever (4L) the whole foot.

5) - Assemble on the machine the towbar (5) complete

of foot with the M10x20 screws, nuts and washers.

6) - Assemble the axle (7) to the base of the machine

with the M8x20 screws and relative washers (two

per part) so that their supports coincide.

7) - Introduce on the axle the antidust ring (7A) with

folded edges turned toward the machine.

8) - Insert the wheel (9) on the axle paying attention to

the spacer (8D) which is between the two bearings,

then insert the self blocking nut (8A) and nally as-

semble the shutting cap (8C).

9) - Pump the tyre (9) bringing the pressure to three

atms.

10) - Lower the machine to the ground and place the par-

king foot denitively (regulating at the best height).

TRAILERS

The machines provided for assembling the accessory (slow towing trolley) can be towed up to a maximum speed

of 40 Kms/hour on asphalted surfaces.

Towing on public roads or turnpikes of any type IS EXCLUDED, because not in possesion of the requirements by

national and foreign trafc norms.

10/06/00 M6GB

ATTENTION

The CTL accessory cannot be removed from the machine and used separately (actioned manually or following vehicles) for

the transport of loads or anyway for used different from the machine movements.

CTM330

CTL330

ATTENTION

Do not substitute the original tires with other types.