C0MP6041ZProduct Card

MADE IN ITALY
language
WELDING AND GENERATION
CS 230 YSX CC/CV
ASYNCRONOUS THREE-PHASE, SELF-REGULATED, SELF-EXCITED, BRUSHLESS
Insulation class H
a.C. gEnEration
C.C. WElding (Constant CurrEnt) C.V. WElding (Constant VoltagE)
SMAW (STICK)/ GTAW (TIG) CC MODE
Current range 20 ÷ 210 A
Type of regulation continue
Duty cycle 210A 60% | 180A 100%
Open circuit voltage 68 V
Arc Force Regulation Si
GMAW (MIG)/ FCAW (FLUX CORED) CV MODE
Welding voltage 16V ÷ 40V
Type of regulation continuous
Duty cycle 500A - 60% / 450A - 100%
gEnEral spECifiCations
Fuel tank capacity 23 l
Starter Battery 12 Vdc -37Ah / 330A CCA(EN)
Fuel consumption
(welding 60%) 1 l/h
Running time
(welding 60%) 20 h
IP protection degree IP 23
Guaranteed acoustic power LwA
(pressure LpA)
91.2 dB(A) (66.2 dB(A) @ 7 m)
Measured acoustic power LwA
(pressure LpA)
93 dB(A) (68 dB(A) @ 7 m)
Max. ambient temperature /
gEnErazionE ausiliaria
OUTPUT 1
Type of source Three-phase
Frequency 50 Hz
Apparent Power (Active Power) 6kVA (4.8kW)
Cos j 0.8
Voltage 400V
Current 8.7A
OUTPUT 3
Type of source Single-phase
Frequency 50 Hz
Apparent Power (Active Power) 2.5kVA (4kW)
Cos j 1
Voltage 110V
Current 22.7A
OUTPUT 2
Type of source Single-phase
Frequency 50 Hz
Apparent Power (Active Power) 5kVA (4kW)
Cos j 0.8
Voltage 230V SCHUKO
Current 21.7A
OUTPUT 4
Type of source /
Frequency /
Apparent Power (Active Power) /
Cos j /
Voltage /
Current /
simultanEous load CharaCtEristiC
WELDING
CURRENT
≥ 150 A 125 A 100 A 75 A 50 A 0 A
POW. IN THREE PHASE 400V 0 kW 1.2 kW 2.2 kW 3 kW 3.5 kW 4.8 kW
POW. IN SINGLE PHASE 230V 0 kW 1.2 kW 2.2 kW 2.7 kW 3 kW 4 kW
POW. IN SINGLE PHASE 115V 0 kW 1 kW 1.3 kW 1.7 kW 2 kW 2.5 kW
pag 2
06/2020
The use of the Auxiliary Generation is recommended for tools related to welding (wheels, electric hammers, lights, etc ...)