Product Card

Specications subject to change without notice. For further information please contact the sales department.
© MOSA - Viale Europa, 59 - 20090 Cusago (Milano) - Italy -phone [phone] - fax + 39-0290390466 E-mail: [e-mail] Web site: www.mosa.it
The images are for reference
ENGINE DRIVEN WELDER
CS 230 YSX CC/CV
VERSION ON
REQUEST
• Auxiliary output 230I-110I-CTE : 1x230 16A 2P+T CEE - 1x110 32A 2P+T CEE - 1x110V 16A 2P+T CEE
OPTIONS ON
REQUEST
• Wirefeeder WF4 (for MIG welding)
• Remote control: RC2 - RC2/90° (cavo 20m)
• Welding kit (mask, gloves, etc.)
• Welding cables K190 (10+8m, 35mm
2
)
K200 (20+15m, 35mm
2
)
• Exhaust extension
• Earthing kit
• Trolley CTM2
• Road trailer CTV4
OPTIONS FACTORY
INSTALLED
• VRD - Voltage reduction device
CT230YSXCC-CVZGB 11/14
Technical data CS 230 YSX CC/CV
C.C. WELDING
(Constant Current)
SMAW (STICK)/ GTAW (TIG)
CC (Constant Current)
C.C. Welding
Constant Current
GMAW (MIG)/ FCAW (FLUX CORED)
CV (Costant Voltage)
Current range
Duty cycle
Open circuit voltage
20 ÷ 210 A
210A - 60%, 180 A - 100%
65 V
Current range
Duty cycle
15 ÷ 30 V
210A - 60%, 180 A - 100%
A.C. GENERATION - 50Hz - Three-phase asyncronous alternator, self-regulated, self-excited, brushless
Three-phase power
Single-phase power
Single-phase power
Insulation class
6 kVA / 400 V / 8.7 A
5 kVA / 230 V / 21.7 A
2.5 kVA / 110 V / 22.7 A
H
ENGINE - Diesel, 4-stroke, direct injection, air cooled
Model
* Output
Cylinders / Displacement
Speed
Fuel consumption (welding 60%)
Yanmar L 100 N
6.5 kW (8.8 HP)
1 / 435 cm³
3000 rpm
1.0 l/h
* Maximum output (not overloadable) according to ISO 3046-1
GENERAL SPECIFICATIONS
Tank capacity
Running time (welding 60%)
IP protection degree
* Dimensions Lxlxh (mm)
* Dr
y weight
** Measured acoustic power LwA (pressure LpA)
** Guaranteed acoustic power LwA (pressure LpA)
23 l
23 h
IP 23
1020x645x930 mm
230 kg
91 dB(A) (66 dB(A) @ 7 m)
92 dB(A) (67 dB(A) @ 7 m)
* Values shown do not include trolleys ** Acoustic power according to European Directive 2000/14/EC.
STANDARD
EQUIPMENT
Diesel
engine
Air
cooling
Electric starter Battery
12V
Engine protec-
tion
Low press.
shut down
Low fuel shut
down
Battery charge
indicator
Hours-meter Central lifting
eye
Asynchronous
alternator
Welding
current electr.
regulation
CC/CV
welding mode
Arc control Sockets Sockets Sockets Ground fault
interruptor
Thermal
shut o
Voltmeter Ready
for RC
2000 / 14 / CE
FEATURES
 Arc welding source in D.C. welding
 SMAW: Shielder Metal Arc Welding (Stick)
 GTAW: Gas Tungsten Arc Welding (TIG)
 GMAW: Gas Metal Arc Welding (MIG)
 High frequency welding current and voltage control
 A.C. generator, single-phase and three-phase
 Aux power also available while welding
 Ground fault interruptor
 MOSA Power optimiser (patent pending)
 Supersilenced
 Large tank (23 l)
 Meets EC directives for noise and safety