Product Manual

USE AS AN ENGINE STARTER
M
35
REV.0-01/01
11/01/01 M35GB
ENGINE STARTER
Keep to the advice indicated page M 21, 26 -
TS
Model
Battery
voltage
Voltmeter
indication(*)
Battery
voltage
Voltmeter
indication(*)
200
200 P
12V
12V
120V
190V
24V 235V
PUSH AND
TWIST
If the engine fails to start, do not insist for at least
15 seconds.
Space the further operations waiting for at least
4 minutes.
CAUTION
Once the engine is started, bring back the engine
IMMEDIATELY to MINIMUM speed.
Disconnect the connection cables of the battery.
Connect the machine with the battery taps (12V or
24V) of the machine engine of which must be started,
respecting the polarities (+) et (-).
Fally insert the cable plugs into the corresponding
sockets (34-34A) turning them clockwise to lock
them in position.
Accelerate the engine so that the voltmeter (N)
shows the value reported on table (*).