Product Manual

17/05/05 M2-2_TS_DSP_GB
SYMBOL TS_, DSP_
M
2.2
© MOSA 1.0-05/04
ARC WELDING HAZARDS
Electric shock from welding electrode or
wiring can kill.
Wear dry, hole-free insulating gloves and
body protection. Do not touch electrode with
bare hand. Do not wear wet or damaged
gloves.
Do not touch live electrical parts.
Wet or confined spaces, or if their is una
danger of falling.
Use AC output ONLY if required for the
welding process. If AC output is required,
use remote output control if present on unit.
Magnetic fields can affect pace-makers.
Pace-maker wearers keep away from arc
welding and cutting operations and
equipment. Wearers should consult their
doctor before going near arc welding,
gouging, arc cutting, or spot welding
operations.
Protect yourself from electric shock by
insulating yourself from work and ground.
Use non-flammable, dry insulating material
if possible, or use dry rubber amts, dry wood
or plywood, or other dry insulating material
big enough to cover your full area of contract
with the work or ground, and watch for fire.
Breathing welding fumes can be hazardous
to your health.
Keep your out of the fumes. Do not breathe
the fumes.Use enought ventilation, exhaust
at the arc, or both, to keep fumes and gases
from your breathing zone and the general
area.
Use enought forced ventilation or local
exhaust (forced suction) at the arc to
remove the fumes from your breathing area.
Use a ventilating fan to remove fumes from
the breathing zone and welding area. If
adequancy of ventilation or exhaust is
uncertain, have your exposure measured
and compared to the T
Welding can cause fire or explosion.
Do not weld near flammable material. Move
flammanles at least (10 m) away or protect
them with flame-proof covers.
Do not weld on drums, thanks, or any
closed containers unless a qualified person
has tested it and declared it or prepared it
to be safe.
Welding sparks can cause fires. Have a
fire extinguisher nearby, and have a trained
fire watcher ready to use it.
Arc rays can burn eyes and skin.
Use welding helmet with correct shade of
filter.
Wear welders cap and safety glasses with
side shields. Use ear protection when
welding out of position or in confined
spaces. Button shirt collar.
Wear complete body protection. Wear oil-
free protective clothing such as leather
gloves, heavy shirt, cuffless pants, and
hight boots.