Product Manual

MAINTENANCE
18/11/08 22262-GB
MAINTENANCE OF THE MACHINE
Maintenance refers to all operations regarding
the control and replacement of mechanical and
electrical parts subject to wear. In addition it
refers to the control and topping up or replace-
ment of uids such as fuel, oil and the regular
cleaning of the machine.
Repairs refers to the substitution of worn or
damaged parts and repairs should be carried
out by Authorized Service Centres.
Refer to the Engine Manufacturer’s Manual for
the maintenance instructions for the engine.
Periodic maintenance should be performed
according to the schedule shown in this manual.
On a regular basis check that there are no
obstructions in the aspiration/exhaust ducts of
the alternator, the engine or the housing which
could restrict the ow of cooling air.
DRY AIR FILTER
Replace the air lter cartridge every 200 hours
under normal conditions and every 100 hours
in dusty environments.
PERMANENT MAGNET ALTERNATOR
No maintenance is necessary, as the alternator
has no brushes or slip rings, and there are no
devices for regulation of the output.
WARNING LABELS AND DECALS
Check warning labels and decals once a year
and replaced if missing or unreadable.
CABLES AND CONNECTIONS
Periodically check the condition of the cables
and tighten the connections.
M
43
REV.0-11/08
WARNING
● Have qualied personnel do maintenance and troubleshooting work.
● Stop the engine before doing any work inside the machine. If for any
reason the machine must be operated while working inside, pay at-
tention moving parts, hot parts (exhaust manifold and mufer, etc.)
electrical parts which may be unprotected when the machine is open.
● Remove guards only when necessary to perform maintenance, and
replace them when the maintenance requiring their removal is complete.
● Please wear the appropriate clothing and make use of the PPE (Per-
sonal Protective Equipment), according to the type of intervention
(protective gloves, insulated gloves, glasses).
● Do not modify the components if not authorized. - See pag. M1.1 -
MOVING
PARTS
can injure
HOT surface
can hurt you
!
IMPORTANT
When carrying out maintenance operations be careful
to avoid polluting the environment with the materials
used during maintenance. Follow all local health and
safety regulations.
!
IMPORTANT
In the maintenance operations avoid that
polluting substances, liquids, exhausted
oils, etc. bring damage to people or things or
can cause negative effects to surroindings,
health or safety respecting completely the
laws and/or dispositions in force in the place.
!