Product Manual

INSTAllATION AND ADVICE
M
2.6
REV.0-11/08
18/11/08 22262-GB
INSTALLATION AND ADVICE BEFORE USE
 Use in open space, air swept or vent exhaust gases,
which contain the deathly carbone oxyde, far from
the work area.
POSITION
Place the machine on a level surface at a distance of at
least 1,5 m from buildings or other plants.
Check that the air gets changed completely and the hot
air sent out does not come back inside the set so as to
cause a dangerous increase of the temperature.
 Make sure that the machine does not move during
the work: block it possibly with tools and/or devices
made to this purpose.
MOVES OF THE MACHINE
 At any move check that the engine is off, that there
are not connections with cables which impede the
moves.
PLACE OF THE MACHINE AND/OR EQUIPMENTS
10°
10°
 = 20° max
10°
10°
 = 20° max
1,5 m
1,5 m
1,
5 m
GAS
DI SCARICO
Maximum leaning of the machine (in case of dislevel)
EXHAUST OUTPUT
ATTENTION
For a safer use from the operator DO NOT
t the machine in locations with high risk of
ood
Please do not use the machine in weather
conditions which are beyond IP protection
shown both in the data plate and on page
named “technical data” in this same manual.
!