Technical information

Micro-KIM Users Manual
©
!(

023A F8
023b 38
023C A9
023d 00
023E 85
023F 62
0240 85
0241 61
0242 65
0243 60
0244 85
0245 60
0246 d8
0247 C9
0248 13
0249 d0
024a b5
024b A9
024C 01
024d 85
024E 60
024F C9
0250 01
0251 F0
0252 AD
0253 20
0254 5C
0255 18
You can go back to 0200 and press the + key and double check your data. Once you have the program entered,
you need to set the time. Address 0060 holds the hours, 0061, holds the minutes and 0062 the seconds. Enter the
correct time into those addresses then enter 0200 on the address display and press the GO key to begin the
program. Your Micro-KIM should now be displaying the time.
You can find more programming samples in the First Book of KIM and the KIM-1 Users manual. Since the
Micro-KIM is a replica based closely on the KIM-1 some of the known issues with the KIM-1 may also be in
the Micro-KIM such as multi-key strokes lighting up the display, or pressing ST right after power up may stop
the display on 1 character. These are examples of normal behavior of the Micro-KIM.
If you feel your Micro-KIM is not functioning properly, feel free to email Briel Computers at
[e-mail] and ask any concerns you may have.