Specifications

12 Morton
®
Installation & Operation Manual
Programming the Whole Home Water Filtration System
When the transformer is plugged into the electrical
outlet, a model code and a test number (example:
J1.4), begin to flash in the faceplate display. Then,
12:00 PM and the words “PRESENT TIME" begin to
flash.
NOTE: If “- - - -” shows in the display, press the

UP or  DOWN button until the model code
“CF 8” shows in the display. Then, press the
PROGRAM button to set, and change to the
flashing “PRESENT TIME" display.
Set Time of Day
If the words “PRESENT TIME" do not show in the dis-
play, press the PROGRAM button until they do.
1. Press the
 UP or  DOWN buttons to set the
present time. Up moves the display ahead; down
sets the time back. Be sure AM or PM is correct.
FIG. 11
UP
button
DOWN
button
Display
CLEAN
button
PROGRAM
button
FIG. 13
NOTE: Press buttons and quickly release to slowly
advance the display. Hold the buttons down
for fast advance.
2. Press the PROGRAM button a few times, until the
time appears on the display, but is not flashing.
FIG. 12
Questions? Call Toll Free 1-888-64 WATER
(1-888-649-2837)
Monday- Friday, 8 AM - 9 PM EST
or visit www.systemsaver.com
When you call, please be prepared to provide the
model, date code and serial number,
located on the rating decal on back of the cover.
Start a Clean Rinse Cycle
To manually start a Clean Rinse cycle, press and
hold
the CLEAN button for a few seconds, until
“RECHARGE NOW” flashes in the display.