Technical Specifications

6
SHOPPING LIST INSTALLATION
REPLACEMENT INSTALL
1” NPT flex connectors (size dependent
on plumbing configuration)
3 bags of Morton Water Softener Salt
3 bottles of Morton Water Softener
Cleaner
NEW INSTALL
1” NPT flex connectors (size dependent
on plumbing configuration)
Copper or PEX tubing
Push-to-connect, no-solder fittings
Thread sealant
Additional 3/8” I.D. tubing
3 bags of Morton Water Softener Salt
3 bottles of Morton Water Softener
Cleaner
Depending on the plumbing
configuration in your home, you may
need some additional items to complete
your purchase. Consider the two lists
below to make your new or replacement
installation a breeze.
You will need to connect the loop to the 1” NPT fittings that come with your new
water softener. You will also need a drain and an electrical outlet nearby. Follow
the steps below to complete your installation.
Scan me to
watch detailed
installation video!
1. Shut off all water to your house
and turn off your water heater
2. Turn on all faucets to drain the
water lines
3. Make proper plumbing
connections to your new softener
4. Plug the unit in and complete
programning
5. Fill the brine tank half full with salt
6. Ensure the bypass is open and turn
water on slowly to check for leaks
7. Turn the water heater back on and
enjoy the benefits of soft water
BASIC INSTALL PROCESS