Brochure
j
C l a m p i n g L e v e r s
j
40
w w w . m o r t o n m a c h i n e . c o m
Safety Clamping Levers
Safety Clamping Levers
with stud
j Handle made from glass-fiber reinforced polyamide
j Bushing made from zinc-plated steel
j Resistant to oils, solvents, and other chemicals
P
ush Down
to Engage
➞
Morton Safety Clamping Levers are used on applications where mis-
taken releasing or repositioning of the clamp lever could lead to an accident.
The lever in its rest position is not connected to the internal spindle and it
can spin freely. The clamp lever engages only after pushing the handle down.
j Handle made from glass-fiber reinforced polyamide
j Screw made from zinc-plated steel
j Resistant to oils, solvents, and other chemicals
I
NCH
PART # X Thread A C D E
SH-801 #10-24 .35 1.04 1.65 1.38
SH-802 #10-32 .35 1.04 1.65 1.38
SH-803 1/4-20 .35 1.04 1.65 1.38
SH-804 1/4-20 .47 1.42 2.56 1.97
SH-805 5/16-18 .47 1.42 2.56 1.97
SH-807 3/8-16 .67 1.81 3.15 2.48
SH-808 1/2-13 .67 1.81 3.15 2.48
M
ETRIC
P
ART # X Thread A C D E
SH-902 M5 x .8 9mm 26.5mm 42mm 35mm
SH-903 M6 x 1.0 9 26.5 42 35
SH-904 M6 x 1.0 12 36 65 50
SH-905 M8 x 1.25 12 36 65 50
SH-907 M10 x 1.50 17 46 80 63
SH-908 M12 x 1.75 17 46 80 63
Push Down
to Engage
➞
INCH
PART # X Thread L C D E
SH-820 #10-32 .39 1.04 1.65 1.38
SH-821 #10-32 .79 1.04 1.65 1.38
SH-822 1/4-20 .59 1.04 1.65 1.38
SH-823 1/4-20 .79 1.04 1.65 1.38
SH-824 1/4-20 1.18 1.04 1.65 1.38
SH-825 5/16-18 .59 1.42 2.56 1.97
SH-826 5/16-18 .79 1.42 2.56 1.97
SH-827 5/16-18 1.18 1.42 2.56 1.97
SH-828 5/16-18 1.57 1.42 2.56 1.97
SH-829 3/8-16 .79 1.81 3.15 2.48
SH-830 3/8-16 1.18 1.81 3.15 2.48
SH-831 3/8-16 1.57 1.81 3.15 2.48
SH-832 3/8-16 1.97 1.81 3.15 2.48
SH-833 1/2-13 1.18 1.81 3.15 2.48
SH-834 1/2-13 1.97 1.81 3.15 2.48
METRIC
PART # X Thread L C D E
SH-923 M6 x 1.0 10mm 26.5mm 42mm 35mm
SH-925 M6 x 1.0 20 26.5 42 35
SH-928 M8 x 1.25 15 36 65 50
SH-929 M8 x 1.25 20 36 65 50
SH-931 M8 x 1.25 30 36 65 50
SH-933 M10 x 1.50 20 46 80 63
SH-934 M10 x 1.50 30 46 80 63
SH-935 M10 x 1.50 40 46 80 63
SH-937 M12 x 1.75 30 46 80 63
SH-938 M12 x 1.75 40 46 80 63
Morton Safety Clamping Levers are used on applications where mis-
taken releasing or repositioning of the clamp lever could lead to an accident.
The lever in its rest position is not connected to the internal spindle and it
can spin freely. The clamp lever engages only after pushing the handle down.