User`s manual

9
4. K
ick Starting
Grip the brake lever, tread the starting pedal
heavily and then the engine will be started.
Running in
To keep your motorcycle running in a good condition,
ple
ase follow the below rules during the running-in
period.
Distance (km) Speed limitation (km/h)
0-300 25
300-1000 35
1000----- 45
5 seconds is the maximum limit for each
startin
g
and10 seconds is the minimum interval.
Stop pressing the starting button immediately
after the engine starts.
Do not press the starting button while the engine
is running, or the start motor will be damaged.
When using electric starting, please press the
rear brake lever in advance to get through the
circuit and start the motor.
When using electric starting, don’t operate the
starting motor continually, or it may cause
damage to the starting motor and the battery.
Warm up the engine after cold starting (about 3
minutes).
Warning
After the engine started, the
starting
pedal
should be taken back to its original position.
Otherwise, it will affect the driver’s safety.
Please don’t start the engine in unventilated
places, because the wasted gas with CO is
harmful to human being.
Warning
Mortch International Ltd
http://www.mortch.com