User Manual

____________________________________________________________________________Section 2
2-11
Setting the Number of Patient Cable Leadwires
CABLE is used to set the number of leadwires for the patient cable.
From the CONFIGURE menu, scroll to CABLE using the Down or Up/Right keys. Press the Enter key to select
this option. The CABLE menu includes the following options.
• 4-Leadwire
• 5-Leadwire
• 10-Leadwire
Use the Down or Up/Right key to scroll to the desired option and press the Enter key.
When finished, press the Enter key to Exit the Cable menu
Note: When a 4-wire or 5-wire cable is selected, only the limb leads (and a V label with the 5-wire cable) will
appear in LEAD CHECK, DISPLAY ECG and lead fail messages.
Setting Language
LANGUAGE is used to select a language to view in the Main menu and all sub-menu options.
From the CONFIGURE menu, scroll to LANGUAGE using the Down or Up/Right keys. Scroll through the
language options using the Down or Up/Right keys. Press the Enter key to select the desired language.
When finished, press the Enter key to Exit the Language menu
Viewing Software Version Number
Version displays the current software version installed in the X12+ Transmitter.
From the CONFIGURE menu, scroll to VERSION using the Down or Up/Right keys. Press the Enter key to
select VERSION and view the current software.
When finished, press the Enter key to Exit the VERSION menu.
Viewing Battery Voltage
BATTERY displays the voltage of the battery currently installed in the X12+ Transmitter.
From the CONFIGURE menu, scroll to BATTERY using the Down or Up/Right keys. Press the Enter key to
select BATTERY and view the current battery voltage.
When finished, press the Enter key to Exit the BATTERY menu.