User Manual

____________________________________________________________________________Section 2
2-9
Displaying ECG Leads
DISPLAY ECG is used to visually inspect leads I, II, III, V1, V2, V3, V4, V5 and V6 before starting a transmission
session. Check the signal quality and lead amplitude for each lead.
From the Main menu, scroll to ECG Preview using the Down or Up/Right keys. Press the Enter key to select
this option.
Lead I is the first lead displayed on the screen. Use the Down or Up/Right key to scroll from lead to lead.
After visual verification of all leads, press the Enter key to return to the Top Level Menu Options.
Use the Down or Up/Right keys to scroll to Exit and select the Enter key to return to the main menu.
Configuring the Ambulatory X12+ Transmitter
CONFIGURE is used to set the transmitter channel number, the number of patient cable lead wires and language
defaults. This menu is also used to display the software version number and current battery voltage. These settings
are typically set before the initial patient session on the X12+ and do not need to be set on a per patient basis.
From the Main menu, scroll to CONFIGURE using the Down or Up/Right key. Press the Enter key to select this
option.
The CONFIGURE menu includes the following options.
• CHANNEL
• CABLE
• LANGUAGE
• VERSION
• BATTERY
• DONE
Use the Down or Up/Right key to scroll through the CONFIGURE menu options. Press the Enter key when the
desired option is displayed. Select DONE and press the Enter key to return to the Top Level Menu Options. Scroll
to DONE and press the Enter key to return to the main menu.
On the next page, an operational flowchart of CONFIGURE menu options depicts the flow of functionality via the
Up/Right, Down and Enter keys.