User Manual

X12+_______________________________________________________________________________
2-6
Using the Keypad
The keypad is located on the front, lower portion of the Ambulatory X12+ Transmitter. Three keys are available for
navigating through the LCD Menu screens, for powering the X12+ ON/OFF and for sending calls during
transmission.
These include the Up/Right, Down and Enter keys.
Main Menu
The X12+ Transmitter Main LCD menu displays the following information.
• CH: XX = Transmission Channel
• BATTERY SYMBOL = 100%, 75%, 50% or 25% Battery Charge
• Menu = label over the Up/Right key for access to Menu Options
• Off = label over the Enter key to power the X12+ Off
• RL, RA, LL, RL, V1, V2, V3, V4, V5 and/or V6 = Leads in Fail
• CALL = a Call signal has been transmitted
To send a CALL signal, press any one of the three keypad keys. A CALL indicator will appear on the LCD display
to notify the user that a call signal has been transmitted.
To turn the X12+ transmitter off, press and hold the Enter key for approximately three seconds. A menu will
appear prompting the user to select YES or NO. If a selection is not made within three seconds the prompt menu
will be replaced by the Main Menu.
Up/Right Down Enter
CALL = Any Key
Menu Off