User Manual

viii
Indicates compliance to applicable EEC
Directives
Electromagnetic Compatibility (EMC)
Electromagnetic compatibility with surrounding devices should be assessed when using the
X12+ Transmitter.
An electronic device can either generate or receive electromagnetic interference. Testing for electromagnetic
compatibility (EMC) has been performed on the X12+ Transmitter according to the international standard for EMC
for medical devices (IEC 60601-1-2). This IEC standard has been adopted in Europe as the European Norm (EN
60601-1-2).
The X12+ Transmitter should not be used adjacent to, or stacked on top of other equipment. If the X12+
Transmitter must be used adjacent to or stacked on top of other equipment, verify that the X12+ Transmitter
operates in an acceptable manner in the configuration in which it will be used.
Fixed, portable, and mobile radio frequency communications equipment can affect the performance of medical
equipment. See Table X-4 for recommended separation distances between the radio equipment and the X12+
Transmitter.
Accessories and Cables Warning
The use of accessories and cables other than those specified below, may result in increased emissions or decreased
immunity of the X12+ Transmitter.
Description Part Numbers
10-wire LeadForm Patient Cable/ Domestic
• Standard
• Large
10-wire LeadForm Patient Cable/ International
• Standard
• Large
9293-017-50
9293-026-50
9293-017-51
9293-026-51