Instructions

ManualsBrandsMorso ManualsStovesMorsø S11-43 with plain base

1.0 Installing your Morsø stove

1.1 Unpacking the stove

When shipped, the basic stove is ready for mounting legs or a base. The Morsø S11 Series

stoves weigh from 70 to 110 kg (150 to 240 pounds). In order to avoid damages, it is recom-

mended that two persons unpack and install the stove.

1.2 Installing the stove

When shipped, the stove is prepared for installation with a top ue exit. The cast-iron ue collar

and the ball stop, which stops the chimney sweeper’s ball when sweeping, are included with the

stove and are installed when the chimney pipe is installed.

National and local regulations regarding the installation of wood-burning stoves must be observed,

as must local regulations regarding chimney connections and chimney installation. You may want to

ask your chimney sweep for advice. However, you, your technical adviser or workman are responsi-

ble for complying with the applicable national and local regulations.

1.3 Chimney sweep

As stated, it may be wise to consult your local chimney sweep before installing the stove. In

any event, the chimney sweep must be notied once the wood-burning stove has been in-

stalled. The chimney sweep will inspect the installation and schedule sweeping intervals with

you. If your chimney has not been used for some time, it should be inspected for cracks, bird

nests, etc., before it is used.

1.4 Location of the stove/distance requirements

Distance requirements apply only if the stove is placed near ammable materials. Your new

stove can be positioned as specied on the certicate of approval on the back of the stove

if the walls are made of ammable material.

Minimum distances from ammable material:

Type of stove Behind the stove (A)

To the sides of the

stove (B)

To furniture

Morsø S11

uninsulated ue

pipe

240 mm 320 mm 800 mm

Morsø S11

insulated ue pipe

150 mm 300 mm 800 mm

Min. afstand til brandbar væg for Morsø S11

Revisions

Rev.

Sign.:

Title:

Drawing no.:

Dim. without indication of margin acc. to DS/ISO 2768-1 m

1:10

Afstand til hjørnevæg

Distance to Corner wall

Morsø S11-40

RSV

Dimension Skecth

Date of print: 10-08-2011

U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM

S-11-020 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

Side 1 of 4

2011.07.11

45°

Min. afstand til brandbar væg for Morsø S11-40