Instructions

26
NO SV
1.6 Connecting the ue pipe
Lift the upper cast iron top plate o the stove.
Note: the round cast iron cover plate in the top plate must remain mounted if the stove is
being installed with the ue pipe to the rear, but unscrewed from the upper top plate if the
ue pipe is being installed pointing upwards.
Mounting the ue collar pointing upwards
From the factory, the stove is prepared for installation with the included ue collar (1)
pointing upwards with included screws.
Mounting the ue collar to the rear
With a hammer use light, rm taps to
knock out the iron piece on the convec-
tion back panel from the small “bridges”
holding the piece in place.
The cover plate for the smoke outlet is
unscrewed from the back panel and the
xed onto the top panel.
Mount the ue collar onto the back panel
Lift the top panel back into place and the
round section which is provided can be
placed in the top panel and cover for the
blocked o smoke outlet.
The location of the bae
and cast smoke hood
The rear brick and the bae (3), which are
made from vermiculite, are mounted at
the factory.
The bae is lifted from its position and
taken out of the stove. The casted smoke
hood (2) is delivered loose in the stove
and must be attached after installation of
the stove.
The smoke hood is lifted and turned
clockwise into place so it is locked in the
two bolts at the upper ueoutlet .
Make sure that the bae and rear brick stone are correctly assembled before lighting the
stove (please see the sketch.)
Optional fresh air connection
The stove is factory prepared for installation of an optional fresh air connection inde-
pendent of the room in which the stove is installed. The box for this fresh air connection,
which can be purchased separately, enables a ø100mm pipe to be connected either to the
rear or below.
However, this does not apply to the Morsø 7848/7948 pedestal stove, Morsø 7843/7943
with drawer and wall-hung Morsø 7870/7970. The high Morsø 7893/7993 with drawer can
only be tted with fresh air at the rear.
1
2
3
A
A
A-A
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:7
Snit til vejledning
Morsø 7900 R
NRN
14.06.2012
A3
Date of print: 18-06-2020
7900-111 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Morsø 7940