Instructions
23
1.0 Installing your Morsø stove
1.1 Unpacking the stove
The cast-iron basic stove is supplied ready for tting the selected pedestal and upper sec-
tion. The Morsø 7900 series weighs between 108 and 122 kg. To avoid damage during un-
packing and assembling the stove, we recommend that two people carry out this work.
Remove the cardboard packaging, then lift the cast-iron top plate which is lying loose o
the stove before lifting the stove o the wooden pallet. While tting the selected pedestal,
which is supplied separately, lie the stove on its back, if possible with the cardboard pack-
aging as a protective layer. Once assembled, lift the stove up and place it carefully where
it is to be permanently located, so that the pipes can be installed. If the stove is to stand
on ammable material, place it centrally on a base plate made of steel, glass or other non-
ammable material.
Before lighting for the rst time, check that all the internal parts have been positioned cor-
rectly. The packaging can be disposed of according to the applicable waste disposal regula-
tions.
1.2 Installing the stove
National and local regulations regarding the installation of wood-burning stoves must be ob-
served, as must local regulations regarding chimney connections and chimney installation. You
may want to ask your chimney sweep for advice. However, it is you, your technical adviser or
workman, who is responsible for compliance with the applicable national and local regulations.
1.3 Chimney sweep
As stated, it may be wise to consult your local chimney sweep before installing the stove.
In any event, the chimney sweep must be notied once the wood-burning stove has been
installed. The chimney sweep will inspect the installation, and reach an agreement with you
regarding sweeping intervals. If your chimney has not been used for some time, it should be
inspected for cracks, bird nests, etc., before it is used.
1.4 Location of the stove/distance requirements
Distance requirements apply only if the stove is placed near ammable materials. Your new
stove can be positioned as specied on the authorisation sign on the back of the stove if the
walls are made of ammable material.