Declaration of performance - Morsø 7440 with low base
DECLARATION OF PERFORMANCE
Regulation (EU) 305/2011
No. 7440-CPR-2013/07/01
1.
Unique identification code of product-type:
7440
2.
Identification element of the construction product:
Morsø 7440
3.
Intended use or uses of the construction product, in
accordance with the applicable technical specification:
Roomheater burning solid fuel without
hot water supply
4.
Name and contact address of the manufacturer:
Morsø Jernstøberi A/S, Furvej 6, 7900
Nykøbing Mors, Denmark
5.
Where applicable, name and contact address of
authorized representative:
Not applicable
6.
System of assessment and verification of constancy of
performance of the construction product:
System 3
7.
Notified body relevant to the assessment and
verification of constancy of performance:
SINTEF NBL as
Notified body No. 1084
8.
Declared performance:
Harmonized technical specification
EN 13 240:2001/A2:2004/AC:2007
Essential characteristics
Performance
Fire safety
Reaction to fire
A1
Distance to combustible materials
Minimum distances, in mm.
Rear = 200
Sides = 450
Front = 850
Risk of burning fuel falling out
Pass
Emission of combustible products
CO [ 0.05%]
Surface temperature
Pass
Electrical safety
Pass
Cleanability
Pass
Maximum water operating pressure
- bar
Fluegas temperature at nominal heat output
T [184°C]
Mechanical resistance (to carry a chimney /flue)
NPD
Thermal output
Nominal heat output
Room heating output
Water heating output
4.3 kW
4.3 kW
- kW
Energy efficiency
Ƞ [82.3%] at nominal heat output
9.
The performance of the product identified in points 1 and 2 is in conformity with the declared
performance in point 8.
This declaration of performance is issued under the sole responsibility of the manufacturer identified
in point 4
Nykøbing Mors, July 1
st
2013 ____________________________
Peter Jessen Hansen
Managing Director