Instructions

16
Sprog
• The guarantee is no longer valid if the manufacturer’s specications for determining the
convection air and the chimney’s dimension are not followed or if these are later changed.
80cm
•Inserts with sliding doors are supplied with an extra set of counterweights, the door is
self-closing on delivery, but in all other countries can/must be delivered so the door stays
open when lling.
Note that the door must be kept shut when stoking. (Instructions on how to t extra
weights can be found in the assembly instructions).
• Only spare parts expressly approved by the manufacturer may be used.
• If necessary, please contact your dealer.
• No structural changes must be made to the inserts!
•No inammable objects must be placed
inside 80 cm of the radiation area of the
replace inset, measured from the edge
of the combustion chamber’s opening