Instructions
5
1.6 Fluepipe connections
The stove comes standard with a ue collar (1) at the top and a cast-iron cover mounted on
the cast-iron back panel behind the convection back panels. If you want to install the stove
with a rear ue exit remove the knock out section of the convection back panel with steady
hammer taps to the small bridge which holds the knock out in place. Remove the ue collar
from the stove, unbolt the cast-iron cover from the back panel and install it in the top plate.
Centre the ue collar in the hole on the back side of the stove and bolt it securely in place
with the bolts and clamps provided.
Make sure that the bae plate (2), the re bricks and the
riddling are positioned correctly.