Instructions

ManualsBrandsMorso ManualsStovesMorsø 2110

1.1 Unpacking the stove

2110: After removing the outer packaging, unbolt the combustion chamber from the wood-

en pallet and place it gently on its back. The cardboard packaging can be placed underneath

to prevent marring. Remove the leg pack from the stove and bolt each leg/panel securely

to the underside of the base on the combustion chamber, using the bolts provided (found

inside the stove).

We recommend that two people perform the assembly and installation procedure.

The Morsø 2110 weighs 125 kg.

The stove is intended for intermittent use.

1,2 Installing the stove

The stove and chimney installations MUST comply to all current National and Local Building Regu-

lations; your approved Morsø dealer or your local building control ocer can advise regarding this.

Ultimately, it is you and your installer who is responsible that the installation complies.

1.3 Chimney sweep

It may also be wise to consult your local chimney sweep before installing the stove. After your

stove has been installed, it is advisable to have the chimney checked and swept at least once a

year. In any case, if your chimney has not been used for some time, it should be inspected for

cracking, bird nests, etc. before it is put back into use.

1.4 Stove placement/clerance requirements

Minimum Clearance requirements apply if the stove is placed near to combustible materials.

Permitted clearances to combustible materials are also indicated on the data plate on the

rear of the stove.

1.0 Installing your Morsø stove

Minimum clearances to combustible surfaces:

Stove type Behind the

stove (A)

To the sides of

the stove (B)

Above the

stove

To soft

furnishings

Morsø 2110

uninsulated ue

200 mm 400 mm 500 mm 800 mm

45°

Min. afstand til brandbar hjørnevæg for Morsø 2100

Revisions

Rev.

Sign.:

Title:

Drawing no.:

Dim. without indication of margin acc. to DS/ISO 2768-1 m

1:10

Afstand til hjørnevæg

Distance to Corner wall

Morsø 2100

RSV

01.12.2009

Dimension Skecth

Date of print: 04-12-2009

U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM

2100-203 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

Side 2 of 4