Instructions

4
In situations where the stove is to be tted into a brick or non-combustible recess, we re-
commend that the stove is installed with at least 10 cm clearance to the wall, this will allow room
air to circulate around the stove; also the maintenance of the outside stove is easier. When
applied to masonry, a layer of wallpaper is normally classied as a non-combustible surface.
Clearance to combustible surfaces in front of stove:
Model Distance to combustible materials in front of the stove
Ø4 700 mm.
The clearances stated above are minimum distances, but consideration ought to be given to
whether furniture or other items can be aected by heat.
A wood-burning stove gets hot when it is red. The necessary caution must therefore be
observed, particularly where children or the inrm are present.
Hearth requirements:
The stove MUST be tted in accordance with Local and National Building Regulations.
The O-serie stoves has been independently certied.
During the safety test the oor temperature did not exceed 100°C. The stoves may therefor
be placed onto a hearth made of non-combustible board/sheet material or tiles at least 12
mm. thick.
Consideration should also be given as to the stove weight to ensure that the underlying oor
is able to bear the weight.
The handle will get hot when the stove is in use, for this reason a safety mitten is provided.
Clearance Distance to combustible materials:
Model Behind the To the sides
stove (A) of the stove (B) Above the stove To soft furnishings
Ø4 650 mm 550 mm 600 mm 700 mm
uninsulated flue
B
A
Revisions
Rev.
Sign.:
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Afstand til hjørnevæg
Distance to Corner wall
Ø-4
RSV
08.09.09
A4
Dimension Skecth
Date of print: 17-11-2009
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
Steel-121 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
B
B
45°
Revisions
Rev.
Sign.:
Title:
Drawing no.:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
1:10
Afstand til hjørnevæg
Distance to Corner wall
Ø-4
RSV
08.09.09
A4
Dimension Skecth
Date of print: 17-11-2009
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
Steel-121 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Ø4