Instructions

32
1.1 Unpacking the stove
Carefully lift the stove from the wooden pallet and set it carefully in place.
We recommend that two people perform the assembly and installation procedure.
Ø4 weighs 80 kg.
The stove is intended for intermittent use.
1.0 Installing your Morsø stove
1.2 Installing the stove
The stove and chimney installations MUST comply to all current National and Local Buil-
ding Regulations; your approved Ø-Collection dealer or your local building control ocer
can advise regarding this. Ultimately, it is you and your installer who is responsible that the
installation complies.
1.3 Chimney sweeping
It may also be wise to consult your local chimney sweep before installing the stove. After your
stove has been installed, it is advisable to have the chimney checked and swept at least once
a year. In any case, if your chimney has not been used for some time, it should be inspected
for deterioration, bird nests, etc. before it is put back into use.
1.4 Stove placement/clearance requirements
Clearance requirements apply only if the stove is placed near to combustible materials.
Permitted clearances to combustible materials are also indicated on the data plate on the
rear of the stove.