Instructions

10
1. A layer of coals will form rapidly if the stove is lit
with 2 - 4 re lighters or 7 - 10 rolled up sheets of
newspaper, underneath roughly 1 kg of dry kindling.
2. Fully open the the secondary air supply. Push the
air control right in.
3. After the paper/relighters have caught re leave
the re door ajar 2-3 cm so that the chimney draws
well.
4. After 5-10 minutes the chimney draft should be es-
tablished, at this point close the re door. If all the
necessary conditions are met, a nice layer of em-
bers will start to accumulate after another 15 - 20
minutes.
2.1 Lighting and fuelling intervals
A lot of air is needed when rst lighting the stove. When starting with a totally cold stove,
it may be helpful to leave the door ajar (2-3cm) during the rst few minutes; the air intake
should be fully open.
Wood fuel burns well when placed onto an ash bed on the grate of the stove. To achieve this
you should burn roughly 1-2 kg of dry kindling the rst time you light the stove. You should
build and maintain the ash bed to a thickness of approximately 1 cm.