Specifications

10
ENG
5. Refuelling of your stove should be done while
there are still glowing embers in the bed. Spread the embers
across the bottom, but concentrated mostly towards the front
of the stove.
6. Place three pieces of fuel weighing roughly 0.7 kg and measuring
about 30 cm in length across the embers in one layer, with spa-
cing of roughly 1 cm between the pieces of wood.
7. When the primary air supply is opened all the way and the
door is closed, the new fuel will ignite in a few minutes.
8. Once the new fuel has taken, adjust the secondary air amount to
the desired setting; optimal combustion will continue until glowing
charcoals are produced. Under normal chimney draft conditions,
expect to refuel your stove every 70 - 80 minutes.
10. A new charge of wood can be added by repeating steps 5 & 6.