Specifications

4
5
Minimum clearances to combustible surfaces:
On the floor
National and Local Building Regulations must again be observed when considering the type,
thickness and area of the hearth to be used in the installation. The hearth temperature under
safety test was 45°C.
One should of course always make certain that the underlying floor surface can bear the weight
of the stove.
Clearances to Furniture
We recommend that the stove be installed 700 mm from furniture. Serious consideration should
also be given to positioning of any furniture that could be adversely affected by heat.
The clearances to combustible materials in front of the stove should be a minimum of 700 mm.
When lit, a wood-burning stove gets hot and therefore adequate protect must be provided,
particularly in situations where there is a safety risk to children or the infirm. A suitable safety
guard around the stove should be considered.
The stoves handle also gets hot when the stove is lit, which is why a safety glove is in-
cluded with the stove.
1430 corner installation
Stove type Behind the stove
the stove (A)
To the sides
of the stove (B)
Above the Stove Clearances to
furniture
Morsø 1430
uninsulated
flue
600 mm 600 mm 600 mm 650 mm
In situations where the stove is to be fitted into a brick or non-combustible recess, we recommend
that the stove is installed with at least 10 cm clearance to the wall, this will allow room air to
circulate around the stove; also the maintenance of the outside stove is easier. When applied to
masonry, a layer of wallpaper is normally classified as a non-combustible surface.
B
B
45°
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Afstand til brandbar væg
Distance to combustible wall
Morsø 1400
RSV
03.12.2009
A4
Dimension Skecth
Date of print: 04-12-2009
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
1400-345 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Side 2 of 4
B
A
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:10
Afstand til brandbar væg
Distance to combustible wall
Morsø 1400
RSV
03.12.2009
A4
Dimension Skecth
Date of print: 07-12-2009
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
1400-345 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Side 1 of 4